My Semi brick just became a full one

Re: My Semi brick just became a full one

jbc007 — Thu, 23 Sep 2010 04:02:03 +0200

Wow, thanks for reminding me that I screwed up. < /sarcasm>

I never found the application to fix this, but a formatting through the settings works fine.

Re: My Semi brick just became a full one

dirtrider73068 — Thu, 23 Sep 2010 01:51:48 +0200

Don't revive old dead post.

Re: My Semi brick just became a full one

oldtopman — Thu, 23 Sep 2010 00:46:23 +0200

Boot your wii
When you see the "Press A" screen hold down the - and + keys and the press A (keep holding them down).
You are in "Maintenance Mode" Feel free to use comex's NAND formatter or just plain format the wii.

Re: My Semi brick just became a full one

jbc007 — Mon, 02 Aug 2010 05:34:33 +0200

Well, the fact that the health screen appeared means that your setting.txt if now fine. Your message data is most likely corrupted, which is causing the issue. I can't remember the fix for that at the moment, so hopefully someone else can help. Otherwise I'll get back to you sometime later.

Re: My Semi brick just became a full one

Vorpal — Mon, 02 Aug 2010 00:26:23 +0200

I'm getting a bit confused here. The readme text states to use the GC Wadmanager to reinstall the menu before using GC settings Fix. When I tried using it and selected to retrieve files from SD card it says no files were found, so then I tried what you said and ran the GC Settings Fix. It went as follows :
"setting.txt not found! Backup setting.txt with SD card? (yes)".

I found it odd since I had the setting.txt file that came with it on the root of my SD card the whole time, and now I feel like I just backed up my corrupted Wii settings. ~~I'm still stuck with this black screen.~~

Scratch that part about being stuck with a black screen. I just turned the Wii on by ejecting my Brawl disc (without my Bootmii SD card inserted) and I saw the health + safety warning frozen on the screen. Turned the Wii off and back on and met with a black screen again.

This is similar to a problem I had a year ago when the Wii would either freeze at the warning or give a black screen. After several months of being unplugged I tried turning it on again and made it to the system menu with a message from the Wii saying something around the lines of "Message data was corrupted and has been repaired." I don't know how it worked back then, but now I'm really confused.

Re: My Semi brick just became a full one

jbc007 — Sun, 01 Aug 2010 23:12:55 +0200

It seems that System Setting Replace Mod did not work. Download and extract this. Put the NTSC-U setting.txt on the root of your SD card, and run GC settings fix.

Re: My Semi brick just became a full one

Vorpal — Sun, 01 Aug 2010 21:22:19 +0200

I installed IOS60 when I ran Dop-Mii. Bootmii reports "SysMenu : 4.1U boot1b boot2v2". Also says 58.9% NAND FS usage if it matters.

Re: My Semi brick just became a full one

jbc007 — Sun, 01 Aug 2010 17:11:21 +0200

Did you install IOS 60? Also, what does Bootmii report for the system menu version?

Re: My Semi brick just became a full one

Vorpal — Sun, 01 Aug 2010 06:28:22 +0200

I ran Dop-Mii first, and once it got to "Are you read to install System Menu 4.1?" it started installing, but it just stayed there for an hour and a half. I held down the power button for 4 seconds to turn it off since there was no other option. I then installed cIOS and ran the System Settings Replace Mod. It reported that it was successful, so I rebooted. The opera error is gone, but it's just a black screen now. I tried Dop-Mii again to install 4.1 and it completed it's installation, but I still get the black screen when the Wii boots up. I'm at a loss for what to do now.

Re: My Semi brick just became a full one

jbc007 — Sun, 01 Aug 2010 05:45:09 +0200

Some details of what happened when you ran DOP-Mii would be nice. In particular, did anything install correctly? Also, did you power it off while it was installing something, and if so, what?

Re: My Semi brick just became a full one

Vorpal — Sun, 01 Aug 2010 02:33:23 +0200

~~I have a feeling the Dop-Mii installation shouldn't be taking this long. I haven't seen any progress and it's been about a full hour. Should I reset it? Or will that risk further corruption?~~ All right, trying the cIOS method now.

EDIT: All right, just tried both methods, and neither of them worked. The opera error is gone, but now it's just a black screen. Help?

Re: My Semi brick just became a full one

jbc007 — Sun, 01 Aug 2010 01:49:30 +0200

Use DOP-Mii to install IOS 60 and system menu 4.1. Be sure to install the correct system menu for your region. If that doesn't fix it, install cIOS 249 and then run System Setting Replace Mod.

My Semi brick just became a full one

Vorpal — Sun, 01 Aug 2010 01:42:59 +0200

Well, after carefully following a guide on how to use anyregion changer to install system menu 4.1, I was really ticked off when I rebooted to an opera error with glitchy text. I have bootmii installed as boot2 so I can still access the homebrew channel, and I can use Gecko OS to boot discs. The wii remote still syncs. Do I have any options besides savemii? I just had to replace my wii's dvd drive after it fell off a shelf, so I'm not in the mood to order something else.