I have a basic Bluetooth stack that is able to interface pretty well with a wiimote. I've noted that (after pairing, that is the wiimote is bonded to my host controller), a connection is not established every time a wiimote button is pushed. Monitoring my host controller, it looks like the page scan is not "seeing" the wiimote paging to establish a connection (there is nothing at all sent from the host controller to my local host). A connection is eventually established by pushing a wiimote button another time (or two). It seems to be about a 50% connect success rate, with no particular pattern - which wiimote button is pushed doesn't make a difference. I'm wondering if this is due to improper setting of Page Scan Interval, Page Scan Window, or Page Scan Mode on my host controller? I'm using PSM R1, which is what I saw the wiimote announcing in a request. I could try to set the host controller page scan to continuous, but wouldn't that leave no bandwidth for the data communication? Thanks.http://forum.wiibrew.org/read.php?7,73335,73335#msg-73335Thu, 11 Jun 2026 12:56:45 +0200 Phorum 5.2.23 http://forum.wiibrew.org/read.php?7,73335,73378#msg-73378 http://forum.wiibrew.org/read.php?7,73335,73378#msg-73378
2) Likewise, is the correct approach to double the default page scan window (making it now as long as the interlaced (two back-to-back) scans in page scan type 1) or is the proper approach to use the default page scan window but specify page scan type 1?

3) Also: I'm far from an expert, but have been studying the BT spec quite a bit. I may have missed it, but don't see any way to directly query a remote controller, or any event resulting from a remote command that includes the remote controller page scan type. Is this something that requires specialized diagnostic equipment to sniff from the radio transmission itself?

Thank you.]]> ags000 HardwareSun, 21 Jul 2013 17:19:47 +0200 http://forum.wiibrew.org/read.php?7,73335,73377#msg-73377 http://forum.wiibrew.org/read.php?7,73335,73377#msg-73377 tueidj HardwareSun, 21 Jul 2013 12:28:06 +0200 http://forum.wiibrew.org/read.php?7,73335,73373#msg-73373 http://forum.wiibrew.org/read.php?7,73335,73373#msg-73373
Still hoping someone else has seen this or can explain or point to other ways to confirm my suspicion and/or that my solution is robust.]]> ags000 HardwareSat, 20 Jul 2013 20:05:47 +0200 http://forum.wiibrew.org/read.php?7,73335,73372#msg-73372 http://forum.wiibrew.org/read.php?7,73335,73372#msg-73372 ags000 HardwareSat, 20 Jul 2013 18:37:42 +0200 http://forum.wiibrew.org/read.php?7,73335,73335#msg-73335 http://forum.wiibrew.org/read.php?7,73335,73335#msg-73335
I'm wondering if this is due to improper setting of Page Scan Interval, Page Scan Window, or Page Scan Mode on my host controller? I'm using PSM R1, which is what I saw the wiimote announcing in a request. I could try to set the host controller page scan to continuous, but wouldn't that leave no bandwidth for the data communication?

Thanks.]]> ags000 HardwareTue, 16 Jul 2013 19:19:58 +0200