Extracting Saves/Mii's from Nand Backup July 17, 2010 07:31PM | Registered: 13 years ago Posts: 5 |
Re: Extracting Saves/Mii's from Nand Backup July 17, 2010 11:22PM | Moderator Registered: 14 years ago Posts: 5,075 |
Re: Extracting Saves/Mii's from Nand Backup July 19, 2010 07:15PM | Registered: 13 years ago Posts: 5 |
Re: Extracting Saves/Mii's from Nand Backup July 19, 2010 07:52PM | Moderator Registered: 14 years ago Posts: 5,075 |
Re: Extracting Saves/Mii's from Nand Backup July 19, 2010 11:06PM | Registered: 15 years ago Posts: 444 |
Re: Extracting Saves/Mii's from Nand Backup July 20, 2010 06:15AM | Registered: 13 years ago Posts: 5 |
Re: Extracting Saves/Mii's from Nand Backup July 20, 2010 11:53AM | Moderator Registered: 14 years ago Posts: 5,075 |
Re: Extracting Saves/Mii's from Nand Backup July 20, 2010 03:13PM | Registered: 13 years ago Posts: 5 |
Re: Extracting Saves/Mii's from Nand Backup July 21, 2010 09:02PM | Registered: 13 years ago Posts: 5 |
Quote
SifJar
Im not sure if that is legal...anyway, I don't know I'd do much better than you. Three lines sounds about right (depening on the hex editor and the size of the window of course). Try going to the wiki page above and downloading the Mii posted there, and opening it and checking if its the same size.
And no, the edit should be unnecessary in this case as its the same Wii.
As for the savegames, I have no idea, I have never actually used either tool, and have no idea how they work :(
EDIT: OK, here's a little tutorial on how you should be able to do it in hex editor "XVI32" (google it, its pretty good IMO)
1. Find the first byte of first Mii (R i.e. 0x52)
2. Goto Address>Jump Width... and select Hexadecimal and type in 2EF (2F0 - 1)
3. Press Ctrl+B
4. Press F5
5. Press Ctrl+B again
6. Press Ctrl+H
7. Press Ctrl+B (last time)
8. Make a new file
9. Goto Edit>Clipboard>Paste from hex string
10. Repeat for each Mii (don't need to redo Jump Width).
Re: Extracting Saves/Mii's from Nand Backup July 21, 2010 10:18PM | Moderator Registered: 14 years ago Posts: 5,075 |
Re: Extracting Saves/Mii's from Nand Backup October 06, 2010 07:51PM | Registered: 13 years ago Posts: 1 |
Quote
SifJar
OK, I'll try and explain it to you (having never done it myself :P)
In your NAND dump there should be a folder called "title". Inside that, there should be a folder called "00010000". Inside that, there should be a bunch of folders, each with a couple of files inside (data.bin, banner.bin, possibly more).
Make a folder called "savegames" on the root of your SD card, then copy all the folders from title\00010000 in the NAND dump to the savegames folder on the SD card. Then add "00010000" at the start of the name of each folder.
Run Savegame Manager MOD and attempt to install the saves.
If you still get errors, or all the saves don't show up, I have no idea what to do next, sorry.
As for VC, I guess they're probably included in the above steps. If not, I don't know, sorry.
As for Miis: I'm afraid I can't help there. But I'd say if you get the save restored, and the Mii restored, it should all work nicely.
EDIT: OK, I had a bit of a look. Looks like each Mii is 752 (0x2f0) bytes long, and starts with RNCD (0x524E4344), so find RNCD and select from the R and select it along with the next 751 bytes. Copy that, make a new file and paste, you should have an individual Mii. Save it as a .mii file. These can then be installed with Mii Installer. However, first you should extract a Mii made on the console with Mii Extractor, open it in a hex editor and copy everything from 0x1C through 0x1F, and paste it into the same location in each Mii you take from the NAND dump before installing.
I hope this makes sense.
Re: Extracting Saves/Mii's from Nand Backup October 06, 2010 08:29PM | Moderator Registered: 14 years ago Posts: 5,075 |
Re: Extracting Saves/Mii's from Nand Backup October 05, 2011 05:45PM | Registered: 13 years ago Posts: 5 |
Re: Extracting Saves/Mii's from Nand Backup October 19, 2011 11:02AM | Registered: 14 years ago Posts: 234 |