Betwiin - I need help.
Posted by pauloyu
|
Betwiin - I need help. August 28, 2009 01:34AM | Registered: 14 years ago Posts: 28 |
First,
My wii status: Low-level Brick
Homebrew Channel was installed before bricking.
NTSC-J 3.4 => update => brick
What do I need to recovery using Betwiin?
What I know:
Need to flash bootmii to NAND using NAND flasher (I want to buy Infectus 2) mixing Bootmii image with a working NAND image.
But how? Could someone pretty please help me? I dont know how to manage HEX editors...
Really thanks if you can help me.
My wii status: Low-level Brick
Homebrew Channel was installed before bricking.
NTSC-J 3.4 => update => brick
What do I need to recovery using Betwiin?
What I know:
Need to flash bootmii to NAND using NAND flasher (I want to buy Infectus 2) mixing Bootmii image with a working NAND image.
But how? Could someone pretty please help me? I dont know how to manage HEX editors...
Really thanks if you can help me.
|
Re: Betwiin - I need help. August 28, 2009 11:17AM | Registered: 14 years ago Posts: 47 |
First, have you bootmii installed on the bricked console? I think no :)
The thing you have to do first is to find a "donor" console with the same version of boot1 and bootmii installed and do a backup.
Once you have this backup, with and hex editor strip out the last 1024 bytes (containg bootmii infos and keys) and then you can flash it directly "as is" on the nand with an infectus2. This is the hard part of the work, the installation work requires soldering skills and is not so simple. In addition infectus2 seems very unstable on read and write the nand.
Obviously the donor backup will not unbrick your wii but will let you to start bootmii !! Once you get bootmii running on the bricked console you can do a bakcup and extract the keys needed to run betwiin.
Read my post, where I unbrick a console with bootmii installed : [forum.wiibrew.org]
The thing you have to do first is to find a "donor" console with the same version of boot1 and bootmii installed and do a backup.
Once you have this backup, with and hex editor strip out the last 1024 bytes (containg bootmii infos and keys) and then you can flash it directly "as is" on the nand with an infectus2. This is the hard part of the work, the installation work requires soldering skills and is not so simple. In addition infectus2 seems very unstable on read and write the nand.
Obviously the donor backup will not unbrick your wii but will let you to start bootmii !! Once you get bootmii running on the bricked console you can do a bakcup and extract the keys needed to run betwiin.
Read my post, where I unbrick a console with bootmii installed : [forum.wiibrew.org]
Sorry, only registered users may post in this forum.