mymenuify bricked my wii (did not install anything)

i loaded mymenuify (i did not install anything) then words came up and then a black screen came up so i tried preloader and nothing came up

system menu: 4.1U



Edited 2 time(s). Last edit at 06/28/2011 08:20PM by sonicfan105.

Sounds quite unlikely. You sure it was MyMenuify? And what where the words that came up?

Anyhow, it sounds like you got some sort of full brick. Unless you had BootMii/boot2, your Wii is most likely impossible to repair short of dismantling it and using a NAND programmer, and even then only if you happen to have your Wii's keys (e.g. from a BootMii/IOS NAND dump)

i cant remember all the words because it came by so quickly and it was mymenuify gui and i did not back it up with NAND

Then your Wii is never going to work again. Sorry. Sounds like MyMenuify has been coded pretty poorly.

Hello SifJar,
I was wondering if you can help me with a mymenufy problem. When I start mymenufy, the screen goes blank for a few seconds and goes back to the system menu. Any Advice?

Thanks, Vectrexoligy

well there is one way, its called savemii, all you need is the savemii dongle,a gamecube controller,and a game with an update or an auto-bootable update disc, here is a site that sells the dongle: [savemii.net]



Edited 1 time(s). Last edit at 10/16/2013 01:44PM by mmoye9.

HI,

First sorry for my English

I install the "DarkWii_Red_No-Spin_4.3U" of MyMenuifyMod

Now, My wii show the "Press A Button" screen


And when I press the button, I have the BLACK SCREEN

PS.:
@The Controllers conects normal
@I thing that I dont have priiloader and bootmii
@The trick of turn on the wii pressing reset button, dont work

Simple. You downloaded a dodgy theme. Unless BootMii is installed into boot2 and you have a NAND backup, there's nothing you can do.