Hello guys, i Followed the guide but nothing happens, I tried all versions of the bannerbomb but no one works! the version of the console es 4.2 U and it was connected to Nintendo sites, what can I do?? Thanks for your tips.by hypershadow - FixMii
Ok, guys I finally finished the issue, I bought a new console, but this one, don´t have the HBC , this console is a LU64, I need to install the HBC, please tell me what is the best and safer method to do it, Thanksby hypershadow - FixMii
Ok, guys I finally finished the issue, I bought a new console, but this one don´t have the HBC , this console is a LU64, I need to install the HBC, please tell what is the best and safe method to do it, Thanksby hypershadow - FixMii
Sure! I pressed the reset and the Loadmii start, I selected the WadImport it loaded and showed the "a exception has ocurred" and a lot of code. I pressed again the reset and it shows me the menu of Loadmii again. Then I tryed with Wadmanager, and then did it the same thing. So I tryed to load the IOS30 and IOS35 but nothing happens, so I pressed "A" button and it comes out. I´m gonna read aby hypershadow - FixMii
Ok, it´s means, the code dump page is normal. How long do you need to press the reset button??by hypershadow - FixMii
Hello I`ve been trying with Loadmii, but always i get the screen with garbage about the "CODE DUMP" and "STACK DUMP" . With Pimp My Wii I loaded the boot.dol and one menu shows up - pass the test and fix the problems. -pass the test -Manual Installations. - Exit. but the wiimote only blink the four lights when I press some button and do nothing else. I have a doubt. when I unzipped theby hypershadow - FixMii
QuoteSifJarwhat IOS did you choose in WAD Manager? first I tried with IOS249, and then with IOS60, 30 and 35, always I got the same results. Thanksby hypershadow - FixMii
Ok, guys. finally I used the WadImport: I put the wad (.dol file) on SD root and the .wad files on the "wad" carpet. First I used the WadImport and this was what I got. Then I used the wadmanager v1.4 and... I got the same screen. there is a litle difference between Import and manager: manager shows me one menu for to choose which IOS version I must to use. the results... the same thing. hby hypershadow - FixMii
Hi jbc007, I´m sorry but I´m a litle dummy, WaxyPumpkin explain us the method for to use wad, but I´m not sure about which "wad" I should ude, This one . could be . Tanks.by hypershadow - FixMii
Hello jayderyu, I don´t have the solution to your problem, but you could help me, I need to wad several IOS. could you tell wich wad version has you used and how was the results, I mean... it´s easy? any comments will help me. Thanksby hypershadow - FixMii
Ok, WaxyPumpkin thanks, for the explanation, I need to do it ´cause I couldn´t to DOP any file. I installed the dop-ios.elf and then when I tried to use the option "file loaded" it tell me "error reading the file try to install again" and when I used the option "press 1 to load the file" the system only shows "loading file..." I waited for one hour and it do nothing. so I turned off. I´ll useby hypershadow - FixMii
Ok, I´ll use the DOP-IOS tonight. Question: If I need to use the WAD tool , I must to put the .dol file ( the tool) and the .wad file ( the IOS30 downloaded with NUS) in the root of SD card at the same time or: I must to put first the WAD file, to load it and then to put the .wad file. Could you tell me what is the procedure?by hypershadow - FixMii
Hey jbc007, I wanna use the DOP-IOS but I ´ve a doubt. The readme file talk about, to be very sure to have cIOS 249, how can I know if I have it??... The c on cIOS means customized?? What about to upgrade to 3.4 or 4.0 ?? Please choose for me, the better way to recover (to reinstall IOS35 for now) I don´t want to full brick the Wii. Thanks. This is the legend inside the readme file "Usagby hypershadow - FixMii
Ok, the wiimote is back,! and now we can continue working in the "unbricking" the litle white girl, aparently the wiimote battery were discharged. uff!!! So. what thing we can do first? Thanksby hypershadow - FixMii
Hello jbc007, the preloader start still, but don´t work.. that was what I did... I loaded the file dop-ios_v7.elf as usually I do it. the preloader showed me the message "file loaded press 1 for to run." And then... the wiimote was not able for move the "cursor", maybe is posible to move it with a gamecube controller, but i have no one, for now I just can see the menu on the prelby hypershadow - FixMii
Finally I used the DOP-IOS tool and now I´m inthe worst scenario: NOTHING IS WORKING !! : I put the extracted files on the SD card. I load the dop-ios_v7.elf and... the preloader was frozen. And now I had just your help or send it to Nintendo. I hope suggestions. Thanksby hypershadow - FixMii
Yeah! that´s very odd. I´ll to reinstall the IOS35 and then try with AnyRegion Changer again. Question: If I wanna use the Dop-IOS, I must to put the .dol file ( the tool) and the .wad file ( the IOS35 downloaded with NUS) in the root of SD card at the same time or I must to put first the Dop to install it and then to put the .wad file. Could you tell what is the procedure? In the meantime, Iby hypershadow - FixMii
Hi, I hope you can see the pictures with the garbage. picture 2: picture 1: Thanks guysby hypershadow - FixMii
Hi, jbc007: Do you ask me the following issues: Quotejbc007You do get a black screen when you select system menu in preloader, right? Yes. QuotejbcI don't quite understand your question. What are you trying to do with it? In the preloader there are two menus: Systemmenu Hacks has tree topics: Replace health warning with backmenu [enabled] or Region free Wii Games [enabled] orby hypershadow - FixMii
Ok, that was what I did. 1. to remove IOS255 with AnyTitleDeleter. 2. to run SignCheck again, just to verify that IOS255 is not present anymore. 3. to turn on the wii, just to see what´s going on: only show me the HBC frozen screen, I think ´cause I put in the preloader to boot from the HBC.( by the way what are the correct choices in the prloader menus? 4. to run AnyRegion Changer, it startby hypershadow - FixMii
Ok, You´re suggesting me two options, I´ll try first, to delete IOS255 with AnyTitleDeleter and then run AnyRegion Changer again. If this not fix the problem I could re-install IOS30 with WadImport and then Systemmenu 3.2u. It´s that correct? Thanksby hypershadow - FixMii
here is the information on the file: _____________________________________ SignCheck 0.3 aka /dev/nintystuff build report Wii region, Usa Wii unique device id, 111307661 IOS number, "Trucha bug", "Flash access", "Boot2 access", "Usb2.0 IOS tree" IOS255 (ver 31337), Enabled, Enabled, Disabled, Disabled IOS249 (ver 7), Enabled, Enabled, Disabled, Disabled IOS60 (ver 6174), Enabled, Disaby hypershadow - FixMii
Hello jbc007, I´ve not been very lucky with this brick, I run the AnyRegionChanger, downloaded from your link, it shows the configurations and start to install Systemmenu 3.2 and then the screen shows the same garbage. I think I need to remove some file installed with the first AnyRegion I used. In fact I think that many files has been installed, looking the solution to my problem and now thby hypershadow - FixMii
Hi jbc007, i did a second try, run the AnyRegion Changer, the wii show me, the same garbage but in this case I didn´t touch anything , after a long time it showed me warnings about the no responsabilities for the use of the program, bla, bla and one warning about the Korean Systemmenu, suggestions for to install 3 files: SD:/wad/cIOS40 - 74 v2321.wad SD:/wad/cIOS41 - 74 v2320.wad SD:/wad/cby hypershadow - FixMii
Hello jbc007, I put the AnyRegion_Changer_1.1b_mod05.dol file on my SD card. then I run it, it start to show for a few seconds that there is something installing, and then the video is damaged, on the screen i can`t see the options and the remote control is blocked. Do you have any other suggestion??by hypershadow - FixMii
Ok, jbc007 I´ll try tonight, Thanks for your instructions, by the way i was taking a look on *.dol file I suppose I need to put all the content of the unzipped files from AnyRegion Changer on my Sd Card and then load the .dol file and run it. Thanks again.by hypershadow - FixMii
Hi, jbc007, thanks for your answer, first at all, I have no experience doing this. for this reason I would like if you can tell me step by step the procedure for follow your instructions, I suppose I must to put any ( I don´t know which) file.dol or .elf in the SD card. -then turn on and press "Reset" wait until preloader shows up, -to load the file on the wii. -Then turn off, and turnby hypershadow - FixMii
Hello MattMan, I´ve a similar problem: My Wii has system Menu ver 2.89 IOS v30 Preloader v0.28 . I bought the wii and it has the HBC and was able to run game backups, but it was connected to Internet and was turned off in the middle of the updating Right now the only "thing" able to run is the preloader, but I think the preloader is corrupted, cause the wii try to get the preloader v029by hypershadow - FixMii