Welcome! Log In Create A New Profile

Advanced

Please HELP!!!

Posted by pokeglobe 
Please HELP!!!
May 04, 2009 12:05AM
Alright I installed a WAD (I MADE) Not illegal in any way, Now It Banner Bricked me...
I don't have: Preloader,Starfall ( Whatever that is ) I have a GC Remote (That I cannot dissasemble)
I would like to know if Savemii Or Savemiifrii Will Save me!!! I will be in a lot of trouble hehe.

If Savemiifrii will work, How many screws are there in a GC Controller???

PLEASE HELP!!!
Re: Please HELP!!!
May 04, 2009 12:41AM
You're only semi bricked. Savemii or savemiifrii will work fine.
Re: Please HELP!!!
May 04, 2009 01:16AM
So, How come I cannot Dissasemble my GC Remote I Pulled 4 Screws out of it. Only the tops Opens and it sticks down below.

I have a star screwrdriver and a Knife (That is how I got 4 out)
Re: Please HELP!!!
May 04, 2009 01:23AM
BTW, when you fix this, be sure to install preloader...I have bricked my Wii a LOT of times, but I just boot the HBC with preloader and delete my wad...no problem!
Re: Please HELP!!!
May 04, 2009 01:45AM
Quote
pokeglobe
I have a star screwrdriver and a Knife (That is how I got 4 out)
I'm pretty sure a triwing screwdriver will work better ;)



Edited 1 time(s). Last edit at 05/04/2009 01:45AM by Arikado.
Re: Please HELP!!!
May 04, 2009 02:20AM
Quote
pokeglobe
Hey I still need a bit of help here, I saw your message.
Since you have done it before I would lke some help xD

How many Screws does a standard GC remote have and what BIT do I need for a screwdriver?
How does savemii work and do I need a disk or something to make it work?

What does savemiifrii do exactly?
xD Sorry

Ok, I have recovered from a lot of bricks with preloader installed. With savemiifrii, you press down all 4 d pad buttons of a gamecube controller in the 4th GC slot during boot up and it will go into some sort repair system, you then have to enter a game with an update higher than your current system menu version.

You need a trywing to take apart the controller, but maybe if you bend a cheap flat head to make a 2/3s of a triwing driver, that could work too...
Re: Please HELP!!!
May 04, 2009 04:15AM
Ok I most Likely have a BIG Problem here, I have system Menu 4.0 -.- and No Drivechip!!!
I do not know of any game with a higher update then that!!! So am I screwed?

If it helps I have : DVDX Installed.

I have: HBC Installed and fully functioning.
Can Savemii Boot HBC apps? PLEASE SAY YES. My sister will kill me.

EDIT: I didn't mention on the first post. It just Plays that Beggining of the wii music and stays black , Disk drive Makes a lot of sound (Like normally playing a game) So I see it as a banner brick ( not semi ) As shown on [savemii.net]

I also see this: [www.wiibrew.org]

LAST NOTE: All Image sizes were 100% Correct, I made using Wadder.



Edited 6 time(s). Last edit at 05/04/2009 05:19AM by pokeglobe.
Re: Please HELP!!!
May 05, 2009 03:51AM
Also how would updating save a broken wad?
Re: Please HELP!!!
May 05, 2009 09:32PM
Quote
pokeglobe
Also how would updating save a broken wad?
A broekn WAD is a broken WAD. The only way to "save" it would be to first, uninstall it from your wii and then second, fix it on your computer, and then third reinstall it on your wii.
Sorry, only registered users may post in this forum.

Click here to login