Welcome! Log In Create A New Profile


BootMii won't go beyond menu

Posted by Apprentice 
BootMii won't go beyond menu
May 26, 2009 12:13AM
Hello, noob's first post.

My Wii has V3.3U firmware. Using bannerbomb aad20 v108 I've installed BootMii, The HomeBrew Channel and later the Homebrew Browser. The last two seems to work fine.
BootMii starts, shows up the 4 icons - and freezes.
The SD card is a 2GB one, and in the log there's the message that the installed boot1 version prevents a boot2 install.

Thanks for your help.

Here's the install log:

HackMii v0.1 installer starting up
54 titles are installed
Found IOS 254: revision: 0x7a69*
Found IOS 37: revision: 0x816.
Found IOS 36: revision: 0x412.
Found IOS 35: revision: 0x410.
Found IOS 34: revision: 0x40f.
Found IOS 33: revision: 0x410.
Found IOS 31: revision: 0xa10.
Found IOS 30: revision: 0xa10.
Found IOS 28: revision: 0x508.
Found IOS 22: revision: 0x304.
Found IOS 20: revision: 0xc.
Found IOS 17: revision: 0x200.
Found IOS 15: revision: 0x101.
Found IOS 14: revision: 0x101.
Found IOS 13: revision: 0xa.
Found IOS 12: revision: 0x6.
Found IOS 11: revision: 0xa.
Found IOS 21: revision: 0x202.
Found IOS 2: revision: 0x161.
Found IOS 9: revision: 0x204.
Found IOS 4: revision: 0x3.
parsing last generation bootmap
found valid boot2 blockmap at block 1 (pos 0x627c0), submap 0, generation 2
found valid boot2 blockmap at block 5 (pos 0xe67c0), submap 0, generation 3
found 2 valid blockmaps
using generation 3
boot2 blocks: 00 01 02 03 04 05 06
boot2bin @5,0 (blocks=0,1 - bootmii=0)
boot2 blocks: 06 05 04 03 02 01 00
boot2bin @5,1 (blocks=6,5 - bootmii=0)
boot2 block layout: 2 2 1 1 1 0 0
copyright size = 34
copyright text = 'Copyright 2008,2009 Team Twiizers.'
tmd ends at 0x8028ddac, data starts at 0x8028dde0
bootmii version = '0.8'
The test results are in:

 Using IOS versions: Installer: 36, Channels: 37

The Homebrew Channel: Can be installed
DVDX: Can be installed
BootMii: Can be installed in one variant
 The installed boot1 version prevents a boot2 install (-2)
Removing title 0x0001000148415858...
Deleting 1 tickets
A BootMii install requires a SD card.

Runtime files will be written, these are required to
properly boot BootMii.

Mounting SD card...
Creating directory '/bootmii'...
Writing '/bootmii/armboot.bin'...
Writing '/bootmii/ppcboot.elf'...
Writing config file...

Re: BootMii won't go beyond menu
May 26, 2009 12:23AM
Are you sure it's freezing? The wiimote doesn't work with bootmii yet due to "architectural limitations." Try using the power button to cycle between the options and the reset button to choose one (or just use a gamecube NOT wavebird controller).
Re: BootMii won't go beyond menu
May 26, 2009 03:01AM
I had not the least idea the wiimote wouldn't work!
But the power button doesn't do anything and the reset - resets!

So it seems Bootmii is very crude at the moment.
Re: BootMii won't go beyond menu
May 26, 2009 04:37AM
Try using a game cube controller if you have one. You should be able to navigate the menu with that.
Re: BootMii won't go beyond menu
May 26, 2009 04:58PM
I don't have any Gamecube gear, so...
Sorry, only registered users may post in this forum.

Click here to login