Download dop-mii wiibrew edition Load it via exploit or loader Select ios menu Install updated ios from NUS ios 31-36, 58 It should be simple If not you can update from any 3.4-4.2 disc update or If all else fails, update to 4.3 online (I don't like 4.3)by mauifrog - FixMii
If you need to choose an ios, ios236 would be the one for your setup. Really, any ios whould work since your just updating ios.by mauifrog - FixMii
Load dop mii and update ios 31-36by mauifrog - FixMii
Post sd:\installer.load Post your method of loading the hackmii installer Post if you have boot2 bootmii Post if you have priilaoder Post a syscheck log Then it should all be fixed easily.by mauifrog - FixMii
Quotebasicaneeris it possible that i have a broken bt module in this situation?Anything is possible, but doubtful considering it black screened while modding the wii. If the bt module was bad, savemiifrii would also load, the wiimote would not power on the wii, I doubt it is your bt module. You should be able to get the triwing screws out with a small flat head jewelers tool. You could drill aby mauifrog - FixMii
You probably killed it, try savemiifrii.by mauifrog - FixMii
Most wiis made in the last two years will never be able to play any dvd media. You can load media from usb, sd, smb, but doubtful to get dvd working unless the wii is older.by mauifrog - Homebrew General
I think the only way to do it is run the nand.bin formater, and that would probably only work for bootmii ios users. If you have boot2 bootmii, your probably screwed.by mauifrog - Homebrew General
This is a setting.txt editor, it will let you put in your own SN, etc This is setting replace mod Setting replace mod only works with a gc controller setting replace mod only runs on ios249 setting replace mod needs es-identify If you have any issues with it, installing ios36-v1042 into ios slot 249 should get it working, any ios with es-identify should work though. The app comes wiby mauifrog - FixMii
You could just skip the hackmii installer. Load casper via letterbomb and have it load a custom boot2 bootmii, then install a postloader channel. Once you do that you can load anything you like. You could load bootmii with casper and do a nand dump, then have a look at the nand.bin with nandbincheck. My guess is your wii is a mega pirate at one point and has so many titles that it crashes theby mauifrog - Homebrew General
Get giantpunes nandbincheck do- nandbincheck nand.bin -all -v That will check your nand for errors, perhaps give some clue to the issue. Post the logby mauifrog - FixMii
First make a new nand backup, it is named sd:\nand.bin. Second, do your wiimotes work in priiloader? Can you power the wii on with the wiimote?by mauifrog - FixMii
If it blackscreened while running homebrew app you are likely very screwed without a nand backup. AFAIK all wii hardware only works on wii.by mauifrog - FixMii
I doubt ios30 is a stub, dop-mii would install a function system ios prior to the system menu. Sounds like you have a new wii that does not run on ios30-v2576. Who the hell downgrades to 3.3? I don't think anyone has ever tested, but perhaps the 3.3 ios are just as incompatible as the 3.2 ios on some new wii hardware. Or perhaps dop-mii installed ios30-v1040 instead of v2576, I doubt it thouby mauifrog - FixMii
Bannerbricked wii's 4.1 and less can load the netflix dics when not networked, then netflix will take you to system settings. 4.2+ wii's only works on usa wii, probably could disc swap to load it if needed. For a usa wii the netflix disc is the easiest method. You can probably find it on ebay for super cheap.by mauifrog - FixMii
Try holding + - at the health screen, then press A while holding + -. Can you load the HBC? If you get into the HBC, reinstall your system ios and system menu, and it would be best to reinstall priiloader. Also check to see if priiloader uninstalled. Hold reset and turn the wii on while holding reset.by mauifrog - FixMii
There are a few apps, older versions that do things you should not be doing, but when they would crash = black screen SOL. You could test your hardware. BT module should be fine. If you wii was online, turn the wii on and see if it connects to your router. If the wifi module was bad replacing it should fix the wii. If the wii is bricked I doubt it will get online regardless. If you where haby mauifrog - FixMii
You killed you setting.txt, you most likely uninstalled the system menu or the system menu failed to install. You need to use system setting replace mod and restore your setting.txt.by mauifrog - FixMii
You probably have a mailbrick or some similar issue. Doing a format from the wii system settings should fix your issue. Just a suggestion, but if I where you I would install priiloader first. That is just me. I would load maintenance mode, install priiloader from HBC (assuming your still have it). Also if you don't have a nand backup you should make one first (just in case). Also if you loveby mauifrog - FixMii
Ok, I found it NAND Gamesave Restore v1.0 by Krafterby mauifrog - FixMii
Ask krafter on hacksden, he has a tool that will do it for you auto like.by mauifrog - FixMii
You can extract them from your wii with savegame manager Or you can extract a nand.bin with showmiiwads, then pull the savefiles from that and restore with savegame manager.by mauifrog - FixMii
Sorry, but there is nothing you can do to fix it without a nand backup. You followed an outdated method of downgrading a wii to 3.2, unfortunatly for you your wii's hardware does not run on that old system ios, crashing your wii at boot. If you had boot2 bootmii you could fix it, but you don't have boot2 bootmii since you have this issue. Do you have boot2 boot?by mauifrog - FixMii
Wiibrew does not support what you have done to your wii, which is to completely kill it by downgrading it following a stupid guide. If you made a nand backup prior to killing the wii send it to a nand programmer to have it fixed. If you don't have a nand backup, throw it really hard against the wall, then go buy a new one.by mauifrog - FixMii
Load bootmii and make a new nand backup, extract the nand.bin to your had with showmiiwads or similar tool. Then use ohneswanzenegger to format your new nand.bin (make a backup copy first), then install sm 4.1 with ohneswanzenegger, then restore the nand.bin with bootmii. You can then pull your savegames from your extracted nand bin and restore them to your wii, or you can backup them up before yby mauifrog - FixMii
You can fix it by loading smash stack pal via savemiifrii, use discswap pwns or mario kart pwns.by mauifrog - FixMii
Try to change the encryption settings on your router, or change the wifi channel. This should not have anything to do with the HBC, the issue is with your wii and your router most likely, or your isp. Keep trying.by mauifrog - FixMii
Load any title deleter and delete system title "ios 0" if you have it.by mauifrog - FixMii
You have a message board brick, you need to format the wii system settings to fix.by mauifrog - FixMii